ASR9KE - Cisco Aggregation Services Router 9000 Series Essentials
ASR9KE - Cisco Aggregation Services Router 9000 Series Essentials Course Details:
In this course, you will learn about the features and functions of the Cisco ASR 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware; software; Layer 2 and Layer 3 services; Layer 2 and Layer 3 multicast; operations, administration, and management (OAM); quality of service (QoS) features; and network virtualization.
Note: You are required to bring your own laptop and Ethernet cable to class.
Call (919) 283-1674 to get a class scheduled online or in your area!
1. Introduction to the Cisco ASR 9000 Aggregation Series
2. Cisco ASR 9000 Hardware
3. Cisco IOS XR Software Overview
4. Cisco IOS XR Software Basics
5. Cisco IOS XR Software Installation
6. Cisco IOS XR Software Operations
7. Cisco IOS XR Routing Protocols
8. Layer 3 Multicast
9. Cisco IOS XR MPLS
10. Cisco IOS XR Layer 3 VPN
11. Cisco ASR 9000 Layer 2 Architecture
12. Cisco ASR 9000 Point-to-Point Layer 2 Services
13. Cisco ASR 9000 Multipoint Layer 2 Services
14. Cisco ASR 9000 Operations, Administration, and Maintenance
15. Cisco ASR 9000 Layer 2 Multicast
16. Cisco ASR 9000 QoS
17. Cisco ASR 9000 Network Virtualization
*Please Note: Course Outline is subject to change without notice. Exact course outline will be provided at time of registration.
- Major features and benefits of a Cisco ASR 9000 Series router
- Major features and benefits of the Cisco IOS XR Software operating system
- Data flow through the Cisco ASR 9000 Series router
- Configure the Cisco ASR 9000, back out of configuration changes, and restore older versions of the configuration
- Install the Cisco IOS XR operating system, package information envelopes (PIEs), and software maintenance updates (SMUs)
- Enable multicast routing on a Cisco ASR 9000 Series router
- Configure Multiprotocol Label Switch-Traffic Engineering (MPLS-TE) on a Cisco ASR 9000 Series router
- Configure Layer 3 VPN services
- Configure Ethernet link bundles
- Configure local E-Line L2VPN
- Configure Ethernet over MPLS E-Line L2VPN
- Configure EoMPLS with pseudowire backup
- Configure local E-LAN L2VPN
- Configure link-based Ethernet operations, administration, and maintenance (E-OAM)
- Configure virtual private LAN service (VPLS) L2VPN
- Configure VPLS with Border Gateway Protocol (BGP) autodiscovery
- Configure service-based connectivity fault management (CFM)
- Multiple Spanning Tree-Access Gateway (MST-AG)
- Configure Layer 2 multicast features
- Basic QoS implementation
- How to configure and verify network virtualization (nV) on the ASR 9000 series
Lab 1: Hardware Discovery and Initial Configuration
Lab 2: Cisco IOS XR Software Installation
Lab 3: Cisco IOS XR Operations
Lab 4: OSPF Routing Configuration
Lab 5: IS-IS Routing Configuration
Lab 6: BGP Routing Configuration
Lab 7: Layer 3 Multicast
Lab 8: MPLS
Lab 9: Layer 3 VPN
Lab 10: Local E-Line
Lab 11: EoMPLS E-Line
Lab 12: Local E-LAN
Lab 13: VPLS
Lab 14: OAM
Lab 15: Layer 2 Multicast
- Technical professionals, including system engineers, technical support personnel, channel partners, and resellers, who need to know how to deploy Cisco ASR 9000 Series routers in their network environment